<sup id="qwweg"><source id="qwweg"></source></sup>
  • <xmp id="qwweg">
  • <menu id="qwweg"></menu>
  • <nav id="qwweg"><code id="qwweg"></code></nav>
    文章詳情

    flying probe test system/ inline header

    • 產品名稱:flying probe test system/ inline header
    • 產品型號:Condor MTS 505
    • 產品廠商:digitaltest
    • 產品文檔:
    你添加了1件商品 查看購物車
    簡單介紹
    flying probe test system/ inline header Condor MTS 505/flying probe The Condor can combine different test methods and can therefore be used universally for all test strategies. ? 4-head flying probe system ? Universally applicable for all test methods ? Frontloader (manual loading), also available in-line ? Printed circuit boards without test points ? Optional fixture with up to 1,012 fix

    flying probe test system/ inline header

    的詳細介紹

    Our Condor MTS 505 flying probe tester requires no fixture and is therefore ideal not only for traditional production, but also for prototyping and low-volume production. Thanks to the four movable test heads it offers high adaptation depth and test coverage. The optional use of fixed test pins on the underside of the test object means you can also shorten the test time while increasing the test coverage. The Flying Probe test system is equipped with a digital color camera (CMOS) with GigE Vision interface to accurately determine the position of the probe and device under test (DUT). It is attached to one of the four test heads and contains optics, as well as lighting.

    Frontloader

    The board to be tested is manually placed in the tester using a front pull-out with two-handed locking. The bed rails feature adjustable tabs for automatically fixing the board. Magnetic fixing pins, support pins etc. can also be positioned on the base plate of the pull-out.

    Features

    Maximum no. of networks

    unlimited

    Maximum board size (mm)

    432 x 508

    Interface

    Test heads via VG terminal strips, 64-pin

    System size (LxWxD)

    1550 x 2000 x 1200

    Format

    Fixtureless testing, manual loading

    Possible versions

    none

    Maximum fixture pin number

    1012

     

     

    In-Line

    Our in-line tester can be fully integrated into your production line. The circuit board moves automatically over the conveyor inside the tester via an in- and outfeed. The module is clamped up towards the top for testing, so that the PCB thickness makes no difference for contacting. SMEMA-compatible connections are available for pre-heat and post-cool modules in your production line.

    Features

    Maximum no. of networks

    unlimited

    Maximum board size (mm)

    505 x 500

    Interface

    Test heads and cable pin

    System size (LxWxD)

    1550 x 2000 x 1200

    Format

    Fixtureless testing, integrated into production line

    Possible versions

    none

    Maximum fixture pin number

    1012

     0-9 degree contacting

    The test heads of our flying prober are attached to planar rotors and move on a testing axis – the so-called Z-axis. Software control allows the heads to meet the test point at a 0 or 9 degree angle.

    If you approach a component at a 9° angle, this guarantees perfect contact and permits testing as close as possible to the component. With the 0°-setting you can ideally check test points between tall components or arched modules – thereby further increasing your test coverage.

    Barcode scanner

    The barcode scanner located directly on the test head is controlled by the test program and assigns the test result to the correct test object.

    Soft landing function

    Circuit boards are getting ever smaller and more complex, especially in high-tech communication areas such as automotive, medicine and the military. This means the test points are also getting smaller and more sensitive to scratches from the test pins. These are the reasons we developed the “soft landing” technology for our Condor flying prober.

    The principle is simple: the head travels at normal speed towards the test component, but brakes 1-2 mm before arrival. The pin then arrives gently, precisely and at reduced speed at the test point, without scratching the board and hardly leaving a “footprint” behind.

    With our soft landing function you can not only increase test coverage and testing accuracy, but also protect the board from scratches.

     Boundary Scan FPT

    With the boundary scan upgrade to our Flying Probe the needles can act as virtual JTAT/Boundary Scan cells. This increases fault coverage, since now the conductor paths that otherwise could not be reached can also be tested.

    Learn more

    CAN-/LIN-Modules

    The CAN-/LIN modules are standard interfaces for communication with the test object.

    Programmer Modules

    With the Programmer Modules you can make specific selections for onboard flash programming. Here we integrate for example programmers from Ertec, SMH, ProMik or Algocraft.

    IEEE-, RS232-, USB-Modules

    These functional modules have standardized PC interfaces for communicating with additional function test modules.

    ·        Variant frontloader:
    The interface consists of plug connectors (64-pin) – fixtures can be connected to them via cables.

    ·        Variant In-line:
    The interface consists of plug connectors (64-pin) – fixtures can be connected directly to them.

    Multi-Level Fixture (incl. Condor Fixture Lifting Mechanism)
    Two-stage device for the Condor Flying Prober with a lifting mechanism allowing the user to contact the same device in different ways.

    Flying Probe PCB Carriers

    Customized PCB Carriers 
    Are you confronted with the challenge of not having to test inline-capable PCBs? Do your boards fall below the clamping edge of three millimeters? Digitaltest solves the problem and manufactures individually for you suitable PCB carriers, so-called trays. If the circuit boards are tested on one side in our frontloader, a clamping edge on two parallel sides as well as space for the variably adjustable clamping fingers on the other side of the board is sufficient. If these requirements are not met, our trays are a quick and easy solution.

    Universal PCB Carrier
    With this quickly deployable board handling system, your PCBs can be easily tested with our flying probe in front load as well as in in-line operation. Digitaltest has been using trays in its own production for a long time and has already manufactured such PCB carriers for many different types of electronic ass





      








    小×AV导航在线,老湿司机午夜福利在线看,奶白受1分44秒视频微博
    <sup id="qwweg"><source id="qwweg"></source></sup>
  • <xmp id="qwweg">
  • <menu id="qwweg"></menu>
  • <nav id="qwweg"><code id="qwweg"></code></nav>